Cartridge Heater Sleeve Adaptors, Heat Transfer and Release Coating, Unique Space Heater SCB Series

CHSA, HTRC and SCB Series

Sleeve Adaptors, Coating and Unique Space Cartridge Heaters

^€133,07 SCB-100/120V

ZUR BESTELLTABELLE

Cartridge Heater Sleeve Adaptors
Heat Transfer and Release Coating
Unique Space Heater SCB Series

Heizkartuschen - Verwandte Produkte anzeigen

Beschreibung

CARTRIDGE HEATER SLEEVE ADAPTORS for 3/8" & 3/4" Cartridge Heaters

³⁄8" diameter cartridge heaters can be sleeved to fit ½" and ⁵⁄8" diameter holes, allowing one diameter to fit most applications.
¾" I.D. sleeves permit installation of OMEGALUX™ CIR hi-watt density heaters in 1¼" diameter holes to replace old-style large diameter heaters.
Makes removal of heaters easier— no more drilling, hammering, etc.
Made of steel, these pressed powder metal sleeves have been designed and fully tested to assure proper transfer of heat from the cartridge heater to the work.
800°F maximum work temperature. For higher work temperatures, contact OMEGALUX.

Model No.	I.D.(cm)	O.D.	Lgth. In.(cm)
CHSA-1	3/8"(.10)	0.498	1(2.54)
CHSA-2	3/8"(.10)	0.622	1(2.54)
CHSA-3	3/4"(2)	1¼	1(2.54)

HTRC Heat Transfer and Release Coating
OMEGALUX HTRC is used for improving heat transfer and release in the following applications:

Cartridge units in drilled holes
Tubular units in drilled holes, grooves or clampon surfaces
Strip and ring heaters in grooves or clamped on to rough surfaces

Laboratory tests have demonstrated that in high temperature applications, improved heat transfer can lower the internal wire temperature to provide up to 100% improvement in heater life. OMEGALUX HTRC is recommended for use in the above applications where sheath temperature of the heater is expected to exceed 750°F(398°C). HTRC has an excellent transfer coefficient approaching that of aluminum.

Maximum Use Temperature: 1800°F (982°C).
Shelf Life: Greater than one year.

Model No.	Description
HTRC	Heat transfer and release coating, 4FL. oz.

Unique Space Heater SCB Series

Fits in Standard Lamp Socket U120 or 240 Volts
Available from 50 to 200 Watts
Brass Sheath

Edison screw base installs in standard lamp socket for simple installation— to prevent moisture accumulation, mildew, freezing— in clothes lockers, fire extinguisher, cabinets, and control boxes. Also used in resistor banks.

Watts	Model No.	Wt. oz.(Kg)
50	SCB-50/120	9 (4)
75	SCB-75/*	9 (4)
100	SCB-100/*	9 (4)
150	SCB-150/*	9 (4)
200	SCB-200/*	9 (4)

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

Cartridge Heater Sleeve Adaptors

CHSA-1

€5,71

Lieferzeit: 5 Wochen

cartridge heater sleeve, ID 3/8", OD 0.498, length 1"

CHSA-2

€5,71

Lieferzeit: 7 Wochen

cartridge heater sleeve, ID 3/8", OD 0.622, length 1"

CHSA-3

€7,10

Lieferzeit: 7 Wochen

cartridge heater sleeve, ID 3/4", OD 1 1/4", length 1"

Heat Transfer and Release Coating

HTRC

€61,74

Lieferzeit: 1 Woche

Heat transfer and release coating, 4FL. oz.

Unique Space Heater SCB Series

SCB-50/120V

€150,81

Lieferzeit: 5 Wochen

cartridge heater, 50 W, 120 V

SCB-75/120V

€106,76

Lieferzeit: 6 Wochen

cartridge heater, 70 W, 120 V

SCB-75/240V

€106,76

Lieferzeit: 6 Wochen

cartridge heater, 70 W, 240 V

SCB-100/120V

€133,07

Lieferzeit: 1 Woche

cartridge heater, 100 W, 120 V

SCB-100/240V

€113,43

Lieferzeit: 6 Wochen

cartridge heater, 100 W, 240 V

SCB-150/120V

€142,02

Lieferzeit: 6 Wochen

cartridge heater, 150 W, 120 V

SCB-150/240V

€106,76

Lieferzeit: 6 Wochen

cartridge heater, 150 W, 240 V

SCB-200/120V

€106,76

Lieferzeit: 5 Wochen

cartridge heater, 200 W, 120 V

SCB-200/240V

€106,76

Lieferzeit: 6 Wochen

cartridge heater, 200 W, 240 V

*Alle Preisangaben in Euro.