Ceramic Insulated Finned Strip Heater - Two Terminals At One End - T3 Type

CSF3 Series

CSF3 Series Ceramic Insulated Finned Strip Heater

ZUR BESTELLTABELLE

Rugged, Durable Construction
Stainless Steel Sheath
Nickel-Plated Steel Fins (Stainless Steel Optional)
Various Terminations
Trouble-Free Installation
Various Sizes in Stock

Heizbänder - Verwandte Produkte anzeigen

Beschreibung

Click here if you want to know more about strip heaters.

OMEGA™ finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air. OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.

Specification and Tolerances
If tighter tolerances are required consult Omega.
Performance Ratings
Maximum Sheath Temperature: 650°C (1200°F)
Electrical Specifications
Maximum Voltage: 480 Vac (when applicable)
Maximum Amperage: 25 A
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Material Specifications and Physical Sizes
Sheath: 304 stainless steel
Fins: Nickel plated steel (stainless steel optional)
Screw Terminals: Stainless steel 10-32 UNF threads
Width Including Fins: 51 mm (2")
Height Including Fins: 35 mm (13/8")
Length Tolerance: Up to 0.61 m (24") ±1/16", over 0.61 m (24") ±1/8"
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Slot Size For Secondary Insulating Bushing: 13 x 16 mm (1/2 × 5/8") for 300V and above

Model No.		Length		Watts	Watt Density
120V	240V	mm	inch	Watts	Watt/cm²	Watt/in²
CSF00001	CSF00002	266.7	10¹⁄₂	500	3	21
CSF00003	CSF00004	266.7	10¹⁄₂	725	5	31
CSF00005	—	304.8	12	500	3	17
—	CSF00007	304.8	12	650	3	23
CSF00008	CSF00009	304.8	12	900	5	31
CSF00010	CSF00011	355.6	14	750	3	21
CSF00012	CSF00013	355.6	14	1100	5	31
CSF00014	CSF00015	387.4	15¹⁄₄	1250	5	31
CSF00016	CSF00017	454.0	17⁷⁄₈	1550	5	31
CSF00018	CSF00019	495.3	19¹⁄₂	1700	5	31
CSF00024	CSF00025	533.4	21	1900	5	31
—	CSF00026	603.3	23³⁄₄	2200	5	31
—	CSF00027	647.7	25¹⁄₂	2400	5	32
—	CSF00028	679.5	26³⁄₄	2500	5	30
—	CSF00031	774.7	30¹⁄₂	2800	5	30
—	CSF00033	850.9	33¹⁄₂	3150	5	30
—	CSF00034	911.2	35⁷⁄₈	3450	5	31
—	CSF00036	1079.5	42¹⁄₂	4150	5	31
Ordering Example: CSF00005, 500 watt, 120 Vac, finned strip heater.

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

CSF00008

Consult Sales

Lieferzeit:

120 Volt, 900 Watts, 12 Inches Long

CSF00034

Consult Sales

Lieferzeit:

240 Volt, 3450 Watts, 35 7/8 Inches Long

Bestellung nach Modellnummer

Artikelnummer

Stk

Artikelnummer

Stk

*Alle Preisangaben in Euro.