Resistance and Potentiometer Input Signal Conditioners

DRF-RES and DRF-POT

ZUR BESTELLTABELLE

Resistances between 1 K Ω and 10 K Ω
Excitation Current 0.2 mA
Potentiometers between 100 min and 1 M Ω max
Response Time < 70 mS
Accuracy 0.2%
Galvanic Isolation Between Input, Output and Power

Messumformer und Transmitter - Verwandte Produkte anzeigen

Beschreibung

Click on this link if you need more information about signal conditioning.

The DRF series DIN rail signal conditioners are designed to accept a broad range of input signals, such as ac and dc voltage and current, frequency, temperature (thermocouple and RTD), and process transducers, and provide standard process outputs of either 4 to 20 mA, or 0 to 10 Vdc. The DRF series feature a modern housing design, that is easily mounted on standard 35 mm DIN rails. Connections are safely and securely made through pluggable screw terminal connectors, with input and output connections on the opposite sides of the module.

The DRF-RES and DRF-POT signal conditioners accept resistance and potentiometer input respectively and provide an isolated 0 to 10 Vdc or 4 to 20 mA output.

The DRF-RES is available with four standard ranges from 0 to 1500Ω to 0 to 10,000Ω. The DRF-POT can work with a variety of potentiometers from 100Ω up to 1 MΩ.

Models are available with three different power options, 24 Vdc, 115 Vac and 230 Vac. The DRF-RES and DRF-POT are ideally suited for industrial applications. All models mount on a standard 35 mm DIN rail and provide galvanic isolation between input, output and power up to 3500 Veff (model specific). Module response time is 70 ms or less.

Range Code Table for DRF-RES

Range Code	Range
0/1.5K	0 to 1500Ω
0/3K	0 to 3000Ω
0/5K	0 to 5000Ω
0/10K	0 to 10000Ω

SPECIFICATIONS

Signal:
DRF-RES: 2 wire
DRF-POT: 3 wire
Accuracy: <0.2% full scale
Linearity: <0.1% full scale
Thermal Drift: 250 ppm/°C typical (max <200ppm/°C)
Response Time: <70 mS (90% of signal)

Power: 24 Vdc ±10%, 230 Vac ±10% 50/60 Hz, 115 Vac ±10% 50/60 Hz
Power Consumption: <3.8 VA

Output: 4 to 20 mA and 0 to 10 Vdc
Maximum Voltage Output: 11 Vdc approx.
Minimum Voltage Output: -1 Vdc approx.
Minimum Load Resistance (Voltage): >1 KΩ Maximum Current Output: 22 mA approx.
Maximum Current Output: -1.5 mA approx.
Maximum Load Resistance (current): >400 Ω

Electrical Connections: Plug-in screw terminals
Protection: IP-30

MECHANICAL DIMENSIONS
Weight:
(DC Powered Models): 120 g (4.2 oz)
(AC Powered Models): 200 g (7 oz)
Dimensions:
(DC Powered models):
110 H x 22.5 W x 93 mm D (4.3 x 0.9 x 3.7")
(AC Powered models):
110 H x 37 W x 93 mm D (4.3 x 1.46 x 3.7")
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

Resistance Input Signal Conditioners - See the Part Number Builder Below for Additional Models

DRF-RES-24VDC-0/10K-4/20

Consult Sales

Lieferzeit:

Resistance signal conditioner, 0 to 10KΩ input, 4 to 20mA output, 24Vdc powered

DRF-RES-230VAC-0/10K-4/20

Consult Sales

Lieferzeit:

Resistance signal conditioner, 0 to 10KΩ input, 4 to 20mA output, 230Vac powered

DRF-RES-115VAC-0/10K-4/20

Consult Sales

Lieferzeit:

Resistance signal conditioner, 0 to 10KΩ input, 4 to 20mA output, 115Vac powered

DRF-RES-115VAC-0/3K-4/20

Consult Sales

Lieferzeit:

Resistance signal conditioner, 0 to 3KΩ input, 4 to 20mA output, 115Vac powered

DRF-RES-24VDC-0/1.5K-4/20

Consult Sales

Lieferzeit:

Resistance signal conditioner, 0 to 1.5KΩ input, 4 to 20mA output, 24Vdc powered

Potentiometer Input Signal Conditioners

DRF-POT-24VDC-0/100P-4/20

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 4 to 20mA output and 24Vdc powered

DRF-POT-230VAC-0/100P-4/20

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 4 to 20mA output and 230Vac powered

DRF-POT-115VAC-0/100P-4/20

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 4 to 20mA output and 115Vac powered

DRF-POT-24VDC-0/100P-0/10

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 0 to 10Vdc output and 24Vdc powered

DRF-POT-230VAC-0/100P-0/10

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 0 to 10 Vdc output and 230Vac powered

DRF-POT-115VAC-0/100P-0/10

Consult Sales

Lieferzeit:

Potentiometer input signal conditioner with 0 to 10 Vdc output and 115Vac powered

*Alle Preisangaben in Euro.

Modellkonfigurator

Stellen Sie Ihre Modellnummer zusammen

	(1)		(2)		(3)
DRF-RES-		-		-

Optionsbeschreibungen:

(1) Power Wählen Sie:
115VAC für 115 Vac power
230VAC für 230 Vac power
24VDC für 24 Vdc power

(2) Range Code Wählen Sie:
0/1.5K für 0 to 1500 ohm
0/3K für 0 to 3000 ohm
0/5K für 0 to 5000 ohm
0/10K für 0 to 10000 ohm

(3) Output Wählen Sie:
4/20 für 4 to 20 mA
0/10 für 0 to 10Vdc

Anmerkung: Nicht alle Optionen können miteinander kombiniert werden, die gültigen Teilenummern entnehmen Sie bitte dem Datenblatt.