Isolated DIN Rail Mount Loop-Powered 2-Wire Signal Conditioners

DRLP Series

^€318,05 DRLP-MV1

ZUR BESTELLTABELLE

±0.03% Accuracy (Typical)
±0.01% Linearity
1500Vrms Transformer Isolation and 240Vrms Field-Side Protection
ANSI/IEEE C37.90.1 Transient Protection
Wide Loop Supply Voltage, 10.8V to 60V
5-Pole Low-Pass Filtering
Up to 160 dB CMR
85dB NMR at 60Hz, 80dB at 50Hz
Protected Against Reverse Connection of Loop Voltage
-40 to 80°C (-40 to 176°F) Operating Temperature
Mounts on DIN Rail EN 50022, 35 x 7.5 or 35 x 15
CE Compliant
Manufactured per RoHS Directive 2002/95/EC

Messumformer und Transmitter - Verwandte Produkte anzeigen

Beschreibung

The new DRLP Series of loop powered 2-wire transmitters consists of seven family groups with a total of 48 transmitter models that interface to a wide variety of voltage, current, temperature and position measuring devices. The DRLP Series provides superior specifications such as ±0.03% accuracy, five poles of filtering, 1500 Vrms continuous isolation, low output noise, and much more. The DRLP Series 2-wire transmitter conditions and sends analog signals from sensors located in the “field” to monitoring and control equipment, usually computers, located thousands of feet away in central control areas. The DRLP Series accepts a wide range of inputs, including millivolt, volt, milliamp, thermocouple, RTD, potentiometer, and slide wire. It operates on power from a 2-wire signal loop and modulates the supply current to represent the input signal within a 4 to 20-milliamp range. Two-wire transmission loops are very economical methods for connecting sensors to distant control rooms. Since the DRLP Series operates from the signal loop current, no additional, expensive power and wiring are required. Only low cost, twisted pair wiring is needed.

DRLP Loop Drive Capability
The DRLP Series transmitter’s wide range of loop supply voltage (10.8V to 60V) makes it a versatile device which can be used in most any current loop. The maximum loop resistance is determined by subtracting the transmitter’s minimum loop supply voltage from the total loop supply voltage and dividing the result by the maximum loop current (see graph). The low loop supply voltage of 10.8V allows the DRLP to be used in applications with low output power supplies and the high Loop Supply Voltage of 60V allows use in applications with long distance current loops.

COMMON SPECIFICATIONS
Input Protection
  Continuous: 240 Vrms maximum
  Transient: ANSI/IEEE C37.90.1
CMV, Input to Output
  Continuous: 1500 Vrms maximum
  Transient: ANSI/IEEE C37.90.1
Noise
  Output: 100 kHz:3µArms
Output Range: 4 to 20 mA
Output Protection
  Reverse Polarity: Continuous
  Over-Voltage: 240 Vrms continuous
  Transient: ANSI/IEEE C37.90.1
Loop Supply Voltage: 10.8V to 60V
Loop Supply Sensitivity: ±0.0005%/V
Turn-On Delay: 400 ms
Environmental
  Operating Temperature Range: -40 to 80°C (-40 to 176°F)
  Storage Temperature Range: -40 to 80°C (-40 to 176°F)
Relative Humidity: 0 to 95% non-condensing
Emissions EN61000-6-4: ISM, Group 1
  Radiated, Conducted: Class A
Immunity EN61000-6-2: ISM, Group 1
  RF: Performance A ±0.5% span error
  ESD, EFT: Performance B
Mechanical Dimensions: 75 H x 22.5 W x 105 mm D (2.95 x 0.89 x 4.13")
Mounting: DIN EN 50022 35 x 7.5 mm or 35 x 15 mm rail

See attached PDF for detailed Transmitter Specifications

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

DRLP-MV/DRLP-V (Voltage Input)

DRLP-MV1

€318,05

Lieferzeit: 7 Wochen

±10 mV Input Range

DRLP-MV2

€318,05

Lieferzeit: 7 Wochen

±50 mV Input Range

DRLP-MV3

€318,05

Lieferzeit: 7 Wochen

±100 mV Input Range

DRLP-MV4

€318,05

Lieferzeit: 7 Wochen

0 to 10 mV Input Range

DRLP-MV5

€318,05

Lieferzeit: 7 Wochen

0 to 50 mV Input Range

DRLP-MV6

€318,05

Lieferzeit: 7 Wochen

0 to 100 mV Input Range

DRLP-V1

€318,05

Lieferzeit: 7 Wochen

±1V Input Range

DRLP-V2

€318,05

Lieferzeit: 7 Wochen

±5V Input Range

DRLP-V3

€318,05

Lieferzeit: 7 Wochen

±10V Input Range

DRLP-V4

€318,05

Lieferzeit: 7 Wochen

0 to 1V Input Range

DRLP-V5

€318,05

Lieferzeit: 7 Wochen

0 to 5V Input Range

DRLP-V6

€318,05

Lieferzeit: 7 Wochen

0 to 10V Input Range

DRLP-V7

€318,05

Lieferzeit: 7 Wochen

±20V Input Range

DRLP-V8

€318,05

Lieferzeit: 7 Wochen

0 to 20V Input Range

DRLP-C (Current Input)

DRLP-C1

€356,76

Lieferzeit: 7 Wochen

4 to 20 mA Input Range

DRLP-C2

€356,76

Lieferzeit: 7 Wochen

0 to 20 mA Input Range

DRLP-RTD (Pt RTD Input)

DRLP-RTD1

€360,06

Lieferzeit: 7 Wochen

100 Ω Pt -100 to 100°C (-148 to 212°F) Input Range

DRLP-RTD2

€360,06

Lieferzeit: 7 Wochen

100 Ω Pt 0 to 100°C (32 to 212°F) Input Range

DRLP-RTD3

€360,06

Lieferzeit: 7 Wochen

100 Ω Pt 0 to 200°C (32 to 392°F) Input Range

DRLP-RTD4

€360,06

Lieferzeit: 7 Wochen

100 Ω Pt 0 to 600°C (32 to 1112°F) Input Range

DRLP-RTD5

€360,06

Lieferzeit: 7 Wochen

100 Ω Pt 0 to 400°C (32 to 752°F) Input Range

DRLP-RTD6 (Ni RTD Input)

DRLP-RTD6

€360,06

Lieferzeit: 7 Wochen

120 Ω Ni 0 to 300°C (32 to 572°F) Input Range

DRLP-P (Potentiometer Input)

DRLP-P1

€336,05

Lieferzeit: 7 Wochen

0 to 100Ω Input Range

DRLP-P2

€336,05

Lieferzeit: 7 Wochen

0 to 500Ω Input Range

DRLP-P3

€336,05

Lieferzeit: 7 Wochen

0 to 1 kΩ Input Range

DRLP-P4

€336,05

Lieferzeit: 7 Wochen

0 to 10 kΩ Input Range

DRLP-ITC (Non-Linearized Thermocouple Input)

DRLP-ITC-J

€396,14

Lieferzeit: 7 Wochen

J T/C, -100 to 760°C (-148 to 1400°F) Input Range

DRLP-ITC-K

€396,14

Lieferzeit: 7 Wochen

K T/C, -100 to 1350°C (-148 to 2462°F) Input Range

DRLP-ITC-T

€396,14

Lieferzeit: 7 Wochen

T T/C, -100 to 400°C (-148 to 752°F) Input Range

DRLP-ITC-E

€396,14

Lieferzeit: 7 Wochen

E T/C, 0 to 900°C (32 to 1652°F) Input Range

DRLP-ITC-R

€396,14

Lieferzeit: 7 Wochen

R T/C, 0 to 1750°C (32 to 3182°F) Input Range

DRLP-ITC-S

€396,14

Lieferzeit: 7 Wochen

S T/C, 0 to 1750°C (32 to 3182°F) Input Range

DRLP-ITC-B

€396,14

Lieferzeit: 7 Wochen

B T/C, 0 to 1800°C (32 to 3272°F) Input Range

DRLP-ITC-N

€396,14

Lieferzeit: 7 Wochen

N T/C, -100 to 1300°C (-148 to 2372°F) Input Range

DRLP-LTC (Linearized Thermocouple Input)

DRLP-LTC-J1

€409,28

Lieferzeit: 7 Wochen

J T/C, 0 to 760°C (32 to 1400°F) Input Range

DRLP-LTC-J2

€409,28

Lieferzeit: 1 Woche

J T/C, -100 to 300°C (-148 to 572°F) Input Range

DRLP-LTC-J3

€409,28

Lieferzeit: 7 Wochen

J T/C, 0 to 500°C (32 to 932°F) Input Range

DRLP-LTC-K1

€372,06

Lieferzeit: 7 Wochen

K T/C, 0 to 1000°C (32 to 1832°F) Input Range

DRLP-LTC-K2

€372,06

Lieferzeit: 7 Wochen

K T/C, 0 to 500°C (32 to 932°F) Input Range

DRLP-LTC-K3

€372,06

Lieferzeit: 7 Wochen

K T/C, -100 to 1350°C (-148 to 2462°F) Input Range

DRLP-LTC-K4

€372,06

Lieferzeit: 7 Wochen

K T/C, 0 to 1200°C (32 to 2192°F) Input Range

DRLP-LTC-T1

€372,06

Lieferzeit: 7 Wochen

T T/C, -100 to 400°C (-148 to 752°F) Input Range

DRLP-LTC-T2

€372,06

Lieferzeit: 7 Wochen

T T/C, 0 to 200°C (32 to 392°F) Input Range

DRLP-LTC-E

€409,28

Lieferzeit: 7 Wochen

E T/C, 0 to 1000°C (32 to 1832°F) Input Range

DRLP-LTC-R

€372,06

Lieferzeit: 7 Wochen

R T/C, 500 to 1750°C (932 to 3182°F) Input Range

DRLP-LTC-S

€372,06

Lieferzeit: 7 Wochen

S T/C, 500 to 1750°C (932 to 3182°F) Input Range

DRLP-LTC-B

€409,28

Lieferzeit: 7 Wochen

B T/C, 500 to 1800°C (932 to 3272°F) Input Range

DRLP-LTC-N

€372,06

Lieferzeit: 7 Wochen

N T/C, -100 to 1300°C (-148 to 2372°F) Input Range

ACCESSORIES

RAIL-35-1

€17,49

Lieferzeit: 1 Woche

35 mm DIN rail, 1 m (3.3') length

RAIL-35-2

€32,97

Lieferzeit: 1 Woche

35 mm DIN rail, 2 m (6.6') length

*Alle Preisangaben in Euro.
Ordering Example: (1) DRLP-MV1 ±10 mV Input Range, €318,05 plus (1) RAIL-35-1 35 mm DIN rail, 1 m (3.3') length, €17,49, €318,05 + 17,49 = €335,54

Modellkonfigurator

Stellen Sie Ihre Modellnummer zusammen

	(1)		(2)
DRLP		-

Optionsbeschreibungen:

(1) Thermocouple Wählen Sie:
Keine (Feld leer lassen) für None Thermocouple Models
-ITC für Non-Linearized Thermocouple Input
-LTC für Linearized Thermocouple Input

(2) Input Range Wählen Sie:
MV1 für ± 10 mV
MV2 für ± 50 mV
MV3 für ± 100 mV
MV4 für 0 to 10 mV
MV5 für 0 to 50 mV
MV6 für 0 to 100 mV
V1 für ± 1V
V2 für ± 5V
V3 für ± 10V
V4 für 0 to 1V
V5 für 0 to 5V
V6 für 0 to 10V
V7 für ± 20V
V8 für 0 to 20V
C1 für 4 to 20 mA
C2 für 0 to 20 mA
RTD1 für -100 to 100°C (-148 to 212°F)
RTD2 für 0 to 100°C (32 to 212°F)
RTD3 für 0 to 200°C (32 to 392°F)
RTD4 für 0 to 600°C (32 to 1112°F)
RTD5 für 0 to 400°C (32 to 752°F)
RTD6 für 0 to 300°C (32 to 572°F) 120 Ohm Ni.
P1 für 0 to 100 Ohm
P2 für 0 to 500 Ohm
P3 für 0 to 1 k Ohm
P4 für 0 to 10 k Ohm
J für -100 to 760°C (-148 to 1400°F) Non-Linearized Type J Thermocouple
K für -100 to 1350°C (-148 to 2462°F) Non-Linearized Type K Thermocouple
T für -100 to 400°C (-148 to 752°F) Non-Linearized Type T Thermocouple
E für 0 to 900°C (32 to 1652°F) Non-Linearized Type E Thermocouple
R für 0 to 1750°C (32 to 3182°F) Non-Linearized Type R Thermocouple
S für 0 to 1750°C (32 to 3182°F) Non-Linearized Type S Thermocouple
B für 0 to 1800°C (32 to 3272°F) Non-Linearized Type B Thermocouple
N für -100 to 1300°C (-148 to 2372°F) Non-Linearized Type N Thermocouple
J1 für 0 to 760°C (32 to 1400°F) Linearized Type J Thermocouple
J2 für -100 to 300°C (-148 to 572°F) Linearized Type J Thermocouple
J3 für 0 to 500°C (32 to 932°F) Linearized Type J Thermocouple
K1 für 0 to 1000°C (32 to 1832°F) Linearized Type K Thermocouple
K2 für 0 to 500°C (32 to 932°F) Linearized Type K Thermocouple
K3 für -100 to 1350°C (-148 to 2462°F) Linearized Type K Thermocouple
K4 für 0 to 1200°C (32 to 2192°F) Linearized Type K Thermocouple
T1 für -100 to 400°C (-148 to 752°F) Linearized Type T Thermocouple
T2 für 0 to 200°C (32 to 392°F) Linearized Type T Thermocouple
E für 0 to 1000°C (32 to 1832°F) Linearized Type E Thermocouple
R für 500 to 1750°C (932 to 3182°F) Linearized Type R Thermocouple
S für 500 to 1750°C (932 to 3182°F) Linearized Type S Thermocouple
B für 500 to 1750°C (932 to 3182°F) Linearized Type B Thermocouple
N für -100 to 1300°C (-148 to 2372°F) Linearized Type N Thermocouple

Anmerkung: Nicht alle Optionen können miteinander kombiniert werden, die gültigen Teilenummern entnehmen Sie bitte dem Datenblatt.

Zugehörige Dokumentation:

Download French Version - Régulateurs de process et de température

Download Isolated DIN Rail Mount 2-WireTrasmitters