Positive Displacement Flow sensor for Fuels and Oils

FPD3000

Fuel and Oil Flow Meter

ZUR BESTELLTABELLE

Fuel and oil flow meter with Aluminium Body
FKM Seals
Temperatures up to 80ºC
NPT or BSP Threads
DIN, JIS or ANSI Flanges optional (Available on 1", 1½" and 2" Sizes)

Turbinen- und Flügelrad-Durchflussmesser - Verwandte Produkte anzeigen

Beschreibung

FPD3000 Flow Meter The fuel and oil flow meter of the FPD3000 Series are affordable and accurate positive displacement flowmeters. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of fuels and oils as well as other non-abrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPD3000 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.

Specifications
Accuracy: ±0.5% of reading, ±1.0% of reading (1/4" models)
Repeatability: ±0.03%
Fitting Type:
    NPT: Female
    BSP: “-BSP” option
    DIN: “-DIN” option
    JIS: “-JIS” option
    ANSI: “-ANSI” option
Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)
Reed Sensor Power: 30 Vdc (500 mA)
Output Options:
    Pulse Output: Standard
    4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model FPD3003 FPD3005D-A Both models shown smaller than actual sizer.
Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options
    Rate: User defined
    Total: Resettable
    Acc-Total: Non-resettable
Minimum Viscosity: 1cPs
Maximum Viscosity: 1000 cPs standard
Maximum Pressure: See chart on page F-3
Strainer Size: See chart on next page
Mounting: Shafts must be in a horizontal plane
Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option
Cable Length: 1 m (3') stripped ends non-display models
Mounting: Pipe
Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)
Liquid Temperature: -40 to 80°C (-40 to 176°F)
Materials
    Body: Aluminum
    Enclosure: Polypropylene
    Seals: FKM
    Fasteners: Stainless steel
    Cable Insulation: PVC
Enclosure: NEMA 6 (IP67)

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

FPD3002

€866,89

Lieferzeit: 1 Woche

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa)

FPD3002-D

€1.603,79

Lieferzeit: 1 Woche

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powwered digital display

FPD3002-D-A

€2.015,86

Lieferzeit: 7 Wochen

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powwered digital display and 4 to 20mA output

FPD3003

€910,62

Lieferzeit: 7 Wochen

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa)

FPD3003-D

€1.648,05

Lieferzeit: 7 Wochen

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powered digital display

FPD3003-D-A

€1.993,13

Lieferzeit: 7 Wochen

Port Size 1/4 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3004

€1.316,00

Lieferzeit: 2 Wochen

Port Size 1/2 NPT, Max Pressure 2000 psi, (13790 Kpa)

FPD3004-D

€2.053,00

Lieferzeit: 7 Wochen

Port Size 1/2 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display

FPD3004-D-A

€2.578,19

Lieferzeit: 2 Wochen

Port Size 1/2 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3005

€1.656,97

Lieferzeit: 7 Wochen

Port Size 1 NPT, Max Pressure 2000 psi, (13790 Kpa)

FPD3005-D

€2.487,61

Lieferzeit: 7 Wochen

Port Size 1 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display

FPD3005-D-A

€3.012,79

Lieferzeit: 7 Wochen

Port Size 1 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3006

€2.700,18

Lieferzeit: 7 Wochen

Port Size 1 1/2 NPT, Max Pressure 1200 psi, (8274 Kpa)

FPD3006-D

€3.437,00

Lieferzeit: 7 Wochen

Port Size 1 1/2 NPT, Max Pressure 1200 psi, (8274 Kpa), with battery-powered digital display

FPD3006-D-A

€3.962,00

Lieferzeit: 7 Wochen

Port Size 1 1/2 NPT, Max Pressure 1200 psi, (8274 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3007

€3.794,78

Lieferzeit: 7 Wochen

Port Size 2 NPT, Max Pressure 1000 psi, (6895 Kpa)

FPD3007-D

€4.532,00

Lieferzeit: 7 Wochen

Port Size 2 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powered digital display

FPD3007-D-A

€4.787,54

Lieferzeit: 7 Wochen

Port Size 2 NPT, Max Pressure 1000 psi, (6895 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3008

€6.747,00

Lieferzeit: 7 Wochen

Port Size 3 NPT, Max Pressure 175 psi, (1206 Kpa)

FPD3008-D

€7.484,00

Lieferzeit: 7 Wochen

Port Size 3 NPT, Max Pressure 175 psi, (1206 Kpa), with battery-powered digital display

FPD3008-D-A

€8.008,00

Lieferzeit: 7 Wochen

Port Size 3 NPT, Max Pressure 175 psi, (1206 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3009

€12.536,00

Lieferzeit: 7 Wochen

Port Size 4 NPT, Max Pressure 175 psi, (1206 Kpa)

FPD3009-D-A

€13.798,00

Lieferzeit: 7 Wochen

Port Size 4 NPT, Max Pressure 175 psi, (1206 Kpa), with battery-powered digital display and 4 to 20mA output

FPD3034

€1.572,00

Lieferzeit: 7 Wochen

Port Size 3/4 NPT, Max Pressure 2000 psi, (13790 Kpa)

FPD3034-D

€2.310,00

Lieferzeit: 7 Wochen

Port Size 3/4 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display

FPD3034-D-A

€2.834,74

Lieferzeit: 7 Wochen

Port Size 3/4 NPT, Max Pressure 2000 psi, (13790 Kpa), with battery-powered digital display and 4 to 2mA output

*Alle Preisangaben in Euro.
Anmerkung: Comes complete with 3 Vdc lithium battery and operator’s manual.

For units with BSP connections, add suffix “-BSP” to the model number; no additional charge.

For units with DIN flanges, add suffix “-DIN” to the model number; consult sales for additional price.

For units with JIS flanges, add suffix “-JIS” to the model number; consult sales for additional price.

For units with ANSI flanges, add suffix “-ANSI” to the model number; consult sales for additional price.

For units with high viscosity rotors, add suffix “-HV” to the model number; consult sales for additional price.