Positive Displacement Flow Meter for Industrial Processes

FPD3200

Flow meter for industrial processes

ZUR BESTELLTABELLE

Stainless Steel Body
FEP Seals
PPS Rotors
Temperatures up to 80ºC
NPT or BSP Threads
DIN, JIS or ANSI Flanges optional (Available on 1" and Larger Sizes)

Turbinen- und Flügelrad-Durchflussmesser - Verwandte Produkte anzeigen

Beschreibung

The FPD3200 Series positive displacement flowmeters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to measurement for many industrial as well as other non-abrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPD3200 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.

Specifications
Accuracy: ±0.5% of reading, ±1.0% of reading (¼" models)
Repeatability: ±0.03%
Fitting Type:
    NPT: Female
    BSP: “-BSP” option
    DIN: “-DIN” option
    JIS: “-JIS” option
    ANSI: “-ANSI” option
Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)
Reed Sensor Power: 30 Vdc (500 mA)
Output Options:
    Pulse Output: Standard
    4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model
Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options
    Rate: User defined
    Total: Resettable
    Accumulated-Total: Non-resettable
Minimum Viscosity: 1 cPs
Maximum Viscosity: 1000 cPs standard
Maximum Pressure: See chart on page F-3
Strainer Size: See chart on next page
Mounting: Shafts must be in a horizontal plane
Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option
Cable Length: 1 m (3') stripped ends, non-display models
Mounting: Pipe
Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)
Liquid Temperature: -40 to 80°C (-40 to 176°F)
Materials
    Body: Stainless steel
    Enclosure: Polypropylene
    Seals: FEP
    Rotors: PPS
    Fasteners: Stainless steel
    Cable Insulation: PVC
Enclosure: NEMA 6 (IP67)

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

FPD3202

€1.373,26

Lieferzeit: 1 Woche

Port Size 1⁄4", Flow Range; <5 cPs 2 to 100 LPH (0.5 to 26 GPH), >5 cPs 0.5 to 100 LPH (1.3 to 26 GPH), Maximum Pressure psi 1000 Kpa (6895)

FPD3203

€1.410,00

Lieferzeit: 1 Woche

Port Size 1⁄4", Flow Range; <5 cPs 25 to 500 LPH (6.6 to 132 GPH), >5 cPs 15 to 500 LPH (4 to 132 GPH), Maximum Pressure psi 1001 Kpa(6895)

FPD3204

€2.854,98

Lieferzeit: 7 Wochen

Port Size 1⁄2", Flow Range; <5 cPs 3 to 25 LPM (0.8 to 6.6 GPM), >5cPs 2 to 30 LPM (0.5 to 8 GPM), Maximum Pressure psi 2000 Kpa(13790)

FPD3205

€3.798,00

Lieferzeit: 7 Wochen

Port Size 1", Flow Range; <5 cPs 10 to 100 LPM (2.6 to 26 GPM),>5cPs 6 to 120 LPM (1.6 to 32 GPM), Maximum Pressure psi 2002 Kpa(13790)

FPD3206

€6.284,00

Lieferzeit: 7 Wochen

Port Size 11⁄2", Flow Range; <5 cPs 15 to 235 LPM (4 to 62 GPM), >5 cPs 10 to 250 LPM (2.6 to 66 GPM), Maximum Pressure psi 1200 Kpa(8274)

FPD3207

€10.732,90

Lieferzeit: 1 Woche

Port Size 2", Flow Range; <5 cPs 15 to 500 LPM (4 to 130 GPM),>5 cPs 16 to 500 LPM (4 to 130 GPM), Maximum Pressure psi 1001 Kpa(6895)

FPD3234

€3.237,00

Lieferzeit: 7 Wochen

Port Size 3⁄4", Flow Range; <5 cPs 8 to 70 LPM (2 to 18.5 GPM),>5 cPs 3 to 80 LPM (0.8 to 21 GPM), Maximum Pressure psi 2001 Kpa(13790)

*Alle Preisangaben in Euro.
Anmerkung: Comes complete with lithium battery and operator’s manual. For units with a battery powered digital display add “-D” to the model number, for an additional charge. For units with a DC powered digital display and 4 to 20 mA output add “-D-A” to the model number, for an additional charge. For units with BSP connections add “-BSP” to the model number, no additional charge. For units with DIN flanges add “-DIN” to the model number, for an additional charge (1" and larger only). For units with JIS flanges add “-JIS” to the model number, for an additional charge (1" and larger only). For units with ANSI flanges add “-ANSI” to the model number, for an additional charge (1" and larger only).

Zugehörige Dokumentation:

Download Oval Gear Flowmeter w/Pulse Output or Digital Display

Download 12mm LC Digital Display with Analog Output Options