PX291 - Discontinued

PX291

Voltage or Current Outputs
Low Power Consumption
No Moving Parts to Wear
Position Insensitive
Reliable Long Term Stability
Rugged Flame Retardant Case

Beschreibung

The PX291 Series of differential pressure transmitters is designed to measure low pressures while using little power. A selection of ranges is available to meet most industrial and laboratory applications. The transmitters are housed in a flame-retardant, glass-reinforced polyphenylene oxide case. Electrical connections are made by means of a 3.8" terminal with #6 screws. There are no moving parts and the transducers are virtually position insensitive. The span and zero settings are made via 20-turn potentiometers, for easy and precise adjustments. The pressure sensing element is a differential capacitive cell for the low pressure ranges from 0.1 to 5 inH2O and a piezoresistive chip for ranges above 5 inH2O. Both sensors ensure reliability and long-term stability.

SPECIFICATIONS
General: Measures differential, gage pressure or vacuum
Excitation: 11 to 32 Vdc reverse polarity protected
Voltage Output Models: 0 to 5 Vdc 3-wire, source or sink 3.5 mA, short circuit protected, current draw = 10 mA
Current Output Models: 4 to 20 mA, output limited to approximately 3.85 mA at low end and 25 mA at high end Maximum Current Loop Resistance: RL = (Vs - 11) x 50
Accuracy: ±1% includes linearity, hysteresis
Calibration: NIST-traceable
Operating Temperature: 0 to 45°C (32 to 115°F)
Temperature Effects:
Zero: ±0.05%/°C
Span: ±0.02%/°C
Operating Humidity Range: 10 to 90% non-condensing
Shock Resistance: 10 g (11 ms)
Vibration Resistance: 5 g to 50 Hz
Overpressure: See order chart for maximum safe momentary overpressure
Media Compatibility: Suitable for air or inert gas
Pressure Connection: 3.16" Dia. tube connections with integral filters at both ports, suitable for 1.8" ID TygonR or polyurethane tubing (3 to 4 mm) or 1.4" OD polyethlene tubing (6 mm)
Electrical Connection: External 3.8" terminal strip with #6 screws
Case Material: Flame-retardant, glass-reinforced polyphenylene oxide
Dimensions: 36 H x 76 W x 131 mm L (1.4H x 3.0W x 5.15"L)
Weight: 190 g (6.72 oz)

OFFSET OPTIONS
If the measured differential pressure is expected to go from positive to negative, a transducer with offset (elevated zero) should be ordered. The standard models in the order chart have no offset (i.e., at zero differential pressure, the output is 0 Vdc or 4 mA). 2 offset options are available: gAh 1.4 Span Offset At zero differential pressure, the output is 1.25 Vdc or 8 mA
Allowable pressure excursion: -33% to 100% of range gBh 1.2 Span Offset At zero differential pressure, the output is 2.5 Vdc or 12 mA
Allowable pressure excursion: -100% to 100% of range
Examples: PX291-001WD5V-A will have a range of 1"

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

PX291-001WDI

Consult Sales

Lieferzeit:

has a range of 1.00 inH2O at 20 mA and 0 differential pressure at 4 mA,

PX291-001WD5V

Consult Sales

Lieferzeit:

has a range of 1.00 inH2O at 5 Vdc and 0 differential pressure at 0 Vdc

*Alle Preisangaben in Euro.
Anmerkung: See Specifications for desription of the elevated zero option.

Modellkonfigurator

Stellen Sie Ihre Modellnummer zusammen

	(1)	(2)	(3)	(4)
PX291-

Optionsbeschreibungen:

(1) Range Wählen Sie:
0.1 für 0-0.1
0.2 für 0-0.2
0.3 für 0-0.3
0.5 für 0-0.5
001 für 0-1
002 für 0-2
003 für 0-3
005 für 0-5
010 für 0-10
020 für 0-20
030 für 0-30
050 für 0-50
100 für 0-100

(2) Units Wählen Sie:
WD für Range in inH20
D für Range in psid

(3) Output Wählen Sie:
5V für 0 to 5 Vdc
I für 4 to 20 mA

(4) Offset Options Wählen Sie:
für Leave Blank For No Offset
-A für 1/4 Span Offset
-B für 1/2 Span Offset

Anmerkung: Nicht alle Optionen können miteinander kombiniert werden, die gültigen Teilenummern entnehmen Sie bitte dem Datenblatt.