Strain Gauge Adhesive Kit

Strain Gage and Transducer Accessories

ZUR BESTELLTABELLE

Bridge Completion Resistors
Strain Gage Adhesives
Resistance Wire for Temperature Compensation and Zero Balance

Dehnungsmessstreifen, DMS-Brücken - Verwandte Produkte anzeigen

Beschreibung

TERMINAL PADS
Terminal pads serve two main purposes. First, they act as intermediate points for attaching ribbon leads of thin gage wire to heavier instrumentation wires. Second, they provide stress relief to strain gage systems. When the heavy instrumentation wire moves, the terminal pad protects the strain gage.

FIXED BRIDGE COMPLETION RESISTORS
Accuracy:0.1%
Temperature Compensation: 5 ppm (-20 to 80°C/-4 to 176°F)
Power: 1 /4 watt.

ADHESIVES
OMEGA’s TT300 cement is a heat-cured, two-part epoxy adhesive which can be used to bond polyimide backed strain gages for strain measurement up to 200°C (392°F). Each TT300 kit contains 2 bottles of resin and hardener which are premeasured to insure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for one minute. A bottle each of hardener and resin produce approximately 3 /4 oz. of adhesive. The shelf life of the resin-hardener mixture is six weeks at room temperature. The shelf life of the unmixed components is indefinite, provided the bottles are kept tightly sealed. Each TT300 kit includes 2 oz. of Acetone, Acid Primer, Neutralizer and Rosin Solvent for cleaning and preparing the surface, as well as two funnels and two cap brushes. SG496 and SG401 are general purpose cold-curing one-part glues. They are the easiest and most commonly used adhesive for strain gages. They cure in one minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate and SG496 is a methyl-based cyanoacrylate. There is a one-year shelf life at cool room temperature, but increased shelf life can be obtained by cold storage. The glue temperature range is -65 to 180°F (-54 to 82°C).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for adhesive products on this page. You will be contacted by Internet Sales to confirm after the order is placed.

Bestellangaben (Bitte Modellnummer angeben)

Artikelnummer/Beschr.

Stk

Beschreibung

TP-1

Consult Sales

Lieferzeit:

single terminal pad pair, pkg of 10

TP-2

Consult Sales

Lieferzeit:

two terminal pad pairs, pkg of 10

TP-3

Consult Sales

Lieferzeit:

three terminal pad pairs, pkg of 10

TP-4

Consult Sales

Lieferzeit:

four terminal pad pairs, pkg of 10

TP-5

Consult Sales

Lieferzeit:

five terminal pad pairs, pkg of 10

TP-6

Consult Sales

Lieferzeit:

six terminal pad pairs, pkg of 10

RES-120

€16,94

Lieferzeit: 1 Woche

120 Ohm bridge completion resistors

RES-250

€16,67

Lieferzeit: 1 Woche

250 Ohm bridge completion/4-20 mA shunt resistors

RES-350

€17,89

Lieferzeit: 1 Woche

350 Ohm bridge completion resistors

SG496

€42,65

Lieferzeit: ab Lager

1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)

SG401

€13,43

Lieferzeit: ab Lager

0.1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)

SGB-36

€109,78

Lieferzeit: 7 Wochen

36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C

SGC-36

Consult Sales

Lieferzeit:

36 gage Copper wire (1500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C

SGM-36

€38,04

Lieferzeit: 9 Wochen

36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C

*Alle Preisangaben in Euro.
Anmerkung: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual

Zugehörige Dokumentation:

Download TT300 Series - Adhesive Kit

Download SG401 and SG496 - Rapid Cure Strain Gauge Adhesives

Verwandte Produkte:

RES-2C, RES-5C, RES-2N, RES-5N

JETZT BESTELLEN →

Bridge-Balancing and Zero Temperature-Compensation Resistors

BTP-1, RES-120, SGB-36

JETZT BESTELLEN →

Strain Gage Accessories: Resistance Wire, Bondable Terminal Pads (BTP), Bridge Completion Resistors

HBM-M-Series

JETZT BESTELLEN →

HBM High Temperature Strain Gauges | High Temperature and Resistant to Alternating Loads